导师信息#武汉理工大学材料科学与工程学院研究生导师#冯玮

brucei

武汉理工大学材料科学与工程学院研究生导师冯玮介绍如下咨询QQ、微信：2544906分析. 热加工工艺，2012, 41(15):93-95, 98.9. 冯玮.圆柱螺旋齿轮冷精锻成形的三维刚塑性有限元模拟. 热加工工艺, 2010, 39(11):91-93, 96.10. 模具CAD/CAM基础(国家十一五规划教材)．武汉：武汉理工大学出版社，2009
八、联系方式：
1、Tel： 153273767552、E-mail：fengwei@whut.edu.cn3、工作地址（实验室）：材料学院大楼408室
1.Name: Feng Wei2.Brief introduction:1)Date of birth: 02/19732)Degree: Ph.D3)Title: Associate Professor4)Working department: Manufacturing and Processing of Material，School of Material science and Engineering,3.Education experience(after entering university):2008.3- 2011.6 Doctor of Material Processing Engineering,School of Material Science and Engineering,Wuhan University of Technology1999.9- 2003.6 Master of Material Processing Engineering,School of Material science and Engineering,Wuhan University of Technology1992.9-1996.7 Bachelor of Material Processing and Control Engineering, School of Materials Science and Engineering, Wuhan University of Technology4.Working experience:2012.9- present Associate Professor of Material Processing Engineering, School of Material Science and Engineering, Wuhan University of Technology2012.8- 2002.9 Lecturer of Material Processing Engineering,School of Material Science and Engineering,Wuhan University of Technology1996.7-2002.8 Assistant of Material Processing Engineering,School of Material Science and Engineering,Wuhan University of Technology5.Research field(no more than 3):1) Precision forming technology and numerical simulation2) Mold&Die CAD&CAM&CAE Technology3) Plastic Injection Molding6.Research project(no more than 5):1) State science and technology support program: Research on Deformation Mechanism and Technology in Warm Precision Forging Helical Gear2) State science and technology support program： Research on forming mechanism and process design method of rotating fine-blanking technology for helical gear3) The Major State science and technology support program：The Whole New Technology of Precision Forging7.Representative papers and works(no more than 10):[1] Feng Wei, Fu Youheng. High temperature deformation behavior and constitutive modeling for 20CrMnTiH steel.Materials and Design 2014, 57: 465-471[2] Feng Wei，HUA Lin, HAN Xing-hui. Finite element analysis and simulation for cold precision forging of a helical gear，Journal of Central South University of Technology，19(12)，3369-3377，2012[3] Feng Wei , Lin Hua. Multi-objective optimisation of process parameters for the helical gear precision forging by using Taguchi method, Journal of Mechanical science and Technology, 2011, 25(6): 1519-1527[4] Feng Wei, Yunfeng Mei, Kang Yan, Tian Zou, Xinlei Zhang.Billet design optimization of helical gears precision forging based on response surface method and FEM simulation.Advanced Materials Research, 2011, 189-193: 4168-4172[5] Feng Wei, Cao Jichang,Wu Shuting, LI Yangfan.Prediction of forming load for the helical gear precision forging by BP neural network，Advanced Materials Research, 2013, 823:170-174[6] Feng Wei, Xu fujia. Microstructure evolution and dynamic recrystallization model of 20CrMnTiH steel during hot compression. Journal of Plastic Engineering，2014, 21(3):78-84[7] Feng Wei, Cao Jichang,Wu Shuting, LI Yangfan.Application of BP Neural Network in Damage Factor Prediction for Precision Forging Helical Gears. Journal of WUT( Information & Management Engineering),2014, 36(3):328-331[8] Feng Wei.Three Dimensional Coupled Thermo-Mechanical Finite Element Analysis on Temperature Field for Warm Precision Forming of Helical Gear. Hot Working Technology，2012, 41(15):93-95, 98.[9] Feng Wei.3D Rigid Plastic Finite Element Simulation of Precision Cold Forging of Helical Gear. Hot Working Technology2010, 39(11):91-93, 96.[10] Mold CAD/CAM Foundation (the 11th Five-Year Programmed Textbooks)．Wuhan：Wuhan University of Technology Press，20098.Contact information:1) Tel: 153273767552) E-mail: fengwei@whut.edu.cn3) Location of lab: Room 408 in School of Material Science and Engineering office building